Friday, August 19, 2011

Landing Gear, Batteries, and Oil Changes, Oh My!

Checking landing gear rigging is part of the annual inspection process for GCI's Cessna 310. Under Tim and Scott's supervision, apprentice mechanics Ben, Andy, and Paul G. gained some great maintenance experience checking tensions, pressures, limits of travel, and various linkages, and developed a high level of appreciation for how a tiny adjustment in one part of a complex system can have a major impact in another part of the system.

Andy measures the release tension on the right main gear "down-lock" to make sure it's within limits.

Finished with the landing gear, Ben moved on perform engine maintenance.

In between their other tasks, several apprentices are also learning proper methods of battery servicing and "rejuvenation". If you have the time (and it does take time), it is possible to rejuvenate a tired battery, bring it back to health over the course of several days, and save the resources that would otherwise go to purchasing a replacement battery.

Mark checks the fluid in a battery undergoing rejuvenation.

Bob Schwartz, MMS Training Director, has initiated a program where our apprentice mechanics gain several hours of ground school and flight orientation to better help them understand how their maintenance integrates with aircraft operation. Ben Fisher, one of our apprentice mechanics, is also a Certified Flight Instructor. He recently led a class on radio navigation to help the apprentices understand how pilots use VOR's to determine their location in flight.

Ben leads a class in the theory of radio navigation.

The Pfeifer Evangelical Association flew their Aztec in for an oil change and some troubleshooting. The oil change was routine but the troubleshooting indicated the alternator on the Aztec's left engine needed repair. After the repair was made, the airplane was returned to service.

The Pfeifer's Aztec returns to service.

The variety of maintenance tasks that happen in our hangar every day is wide and varied providing a unique environment in which our apprentices can grow into professional, competent and confident mechanics.Thanks for being part of this process through your ongoing gifts and your prayers.

1 comment:

Unknown said...

In my early flight training days I had many opportunities to be thankful for properly-serviced landing gear! I certainly encourage flight instruction for mechanics. Great work fellas!